The Taylor 5789F allows you to switch between pounds (lb) and kilograms (kg).
When the scale behaves unexpectedly, the Taylor Scale Manual 5789F provides a specific error code chart. Here are the most common ones:
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | Err | Overload — Weight exceeds maximum capacity (usually 400 lb or 180 kg). | Remove weight immediately to prevent sensor damage. Use a scale with higher capacity. | | Lo | Low battery. | Replace all three AAA batteries simultaneously. Do not mix old and new. | | UnSt | Unstable weight — You are moving or scale is on a soft surface. | Stand still. Move scale to hard, level floor (tile, wood, concrete). Avoid rugs. | | 0.0 flashes | Scale cannot find a stable zero point. | Check if something is stuck under the glass. Clean the feet. Turn off and retry. | | OLED/Display fade | Extreme temperature or dying battery. | Let scale return to room temperature (50-95°F / 10-35°C). Replace batteries. |
The manual for the Taylor Scale 5789F is crucial for several reasons:
Need the official PDF? While this post covers all operational aspects, if you require the original printed schematic or warranty information, you can visit the official Taylor Precision Products website and search for model "5789F" in their support or warranty section.
The Taylor 5789F is a high-capacity digital lithium scale designed for precision and durability. It features a sleek glass platform and a high-contrast display for easy reading.
Below is a comprehensive guide to operating, troubleshooting, and maintaining your scale. 🛠️ Initial Setup and Calibration taylor scale manual 5789f
Before your first weigh-in, you must prepare the scale to ensure accuracy.
Battery Activation: Pull the plastic tab from the battery compartment on the underside.
Surface Selection: Always place the scale on a hard, flat floor. Using it on carpet or rugs will cause inaccurate readings.
Unit Selection: Locate the "UNIT" button on the bottom of the scale to toggle between pounds (lb) and kilograms (kg). The "Initialization" Process: Press the scale platform with one foot to turn it on. Once "0.0" appears, let the scale turn off. Your scale is now calibrated and ready for use. ⚖️ How to Take a Measurement To get the most consistent results, follow these steps: Step On: Stand still on the center of the glass platform.
Wait for the Lock: The digits will flash when the weight is locked in.
Automatic Shut-off: The scale will turn off automatically after several seconds of inactivity. The Taylor 5789F allows you to switch between
Consistency Tip: Weigh yourself at the same time every day, ideally in the morning without shoes or heavy clothing. ⚠️ Error Codes and Troubleshooting
If the display shows something other than your weight, refer to these common codes:
Err: Initial weight is unstable or the maximum capacity (400 lb / 180 kg) was exceeded. Step off and restart.
Lo: The batteries are low. Replace them with two CR2032 lithium batteries.
O-L: Overload warning. Remove the weight immediately to prevent sensor damage.
Inconsistent Readings: If weights vary wildly, check for debris under the feet or move the scale to a different hard-surface tile. 🧹 Maintenance and Care Need the official PDF
Cleaning: Use a damp cloth with mild soap. Never submerge the scale in water or use harsh chemical cleaners.
Storage: Keep the scale in a dry environment. Do not store items on top of the scale, as constant pressure can wear out the sensors.
Battery Safety: If you won't use the scale for several months, remove the batteries to prevent corrosion. Are you getting wildly different weights back-to-back?
Are you looking to sync it with an app (if applicable to your specific sub-model)?
I can provide step-by-step repair tips or help you find replacement parts.
Taylor Precision Products Instruction Manual & User Guide
Model: 5789F Product: Digital Body Fat Scale with Body Water Monitoring