عضویت 
ورود اعضا
راهنمای خرید
Multiecuscan Elm327 Port Settings 2021 Guide
Do not let Windows auto-install drivers.
This is the most common error users make.
Click the Test button inside MES. In 2021, a successful connection will show: multiecuscan elm327 port settings 2021
ELM327 v1.5 (or higher)
Connected to interface.
Voltage: 12.2V (Stable)
Baud rate: 38400
OK
Troubleshooting the Test:
| Setting | Value | Why |
|---------|-------|-----|
| Bits per second | 38400 (or 115200 if interface supports it) | MES v4.x+ defaults to 38400 for stability; 115200 for faster init |
| Data bits | 8 | Standard |
| Parity | None | Standard |
| Stop bits | 1 | Standard |
| Flow control | None | ELM327 does not use hardware flow control | Go to "Scan" → "Automatic Scan" → Select your model
Right-click the COM port → Properties → Port Settings tab:
Click OK.
Open MultiEcuScan. Do not use the "Auto-detect" feature immediately; it is often faster to set the parameters manually.
Modern 2021 vehicles use high-speed CAN (500 kbps) and, increasingly, CAN FD (for models like the 2021 Fiat 500 Hybrid) or D-PDU API interfaces. Older ELM327 v1.4 clones often fail on these networks due to: Do not let Windows auto-install drivers
MultiECUScan 2021 editions enforce:
