Jxmcu Driver 99%

| Issue | Solution | |--------|----------| | Driver installs but device not working | Disable Driver Signature Enforcement on Windows 10/11 (temporary, for unsigned drivers). | | Error 10 (Device cannot start) | Uninstall the device from Device Manager, check "Delete driver software", then reinstall the official CH340 driver. | | COM port not appearing | Try a different USB cable (must support data, not just charging). Also try another USB port (USB 2.0 is more reliable). | | Linux/Mac not detecting | On Linux, run sudo modprobe ch341. On Mac, install the SiLabs CP210x driver or use a community CH340 driver. |

If the JXMCU implements a CDC (Communications Device Class) or vendor-specific USB-to-serial: jxmcu driver

Typical VID/PID (if known):

(For ESP8266, use --chip esp8266 and correct offsets.) | Issue | Solution | |--------|----------| | Driver