Handloader Ammunition Reloading Journal October 2011 Issue Number 274

One of the cornerstone pieces in Number 274 was a comprehensive evaluation of the .25-06 Remington. At the time, the cartridge was enjoying a renaissance, thanks to improved bullet technology (specifically, the advent of high-BC 115-120 grain bullets). The author, likely Brian Pearce or Dave Scovill, provided:

Why it endures: The .25-06 has since faded slightly behind the 6.5 Creedmoor, but the reloading techniques for managing over-bore capacity cartridges (like powder selection for throat erosion) remain 100% relevant.

Issue #274 dedicated significant column inches to the .220 Swift, the king of 4,000+ fps. This article was a warning and a guide. It detailed the "pressure wedge" phenomenon specific to the Swift—how a minor overcharge could jump pressure by 20,000 CUP instantly.

For specific content from Issue Number 274, I recommend:

Handloader Ammunition Reloading Journal: A Treasure Trove of Reloading Knowledge

The October 2011 issue (Number 274) of the Handloader Ammunition Reloading Journal is a must-have for anyone serious about reloading their own ammunition. This issue is packed with valuable information, tips, and techniques to help reloaders of all skill levels improve their craft.

Featured Articles

Reloading Tips and Techniques

Load Data and Ballistics

What's New in Reloading

Why You Need This Journal

Whether you're a seasoned reloader or just starting out, the Handloader Ammunition Reloading Journal October 2011 Issue Number 274 is an invaluable resource that will help you improve your reloading skills, stay up-to-date on the latest developments in reloading, and get the most out of your reloading experience. With its in-depth articles, reloading tips and techniques, and comprehensive load data, this journal is a must-have for anyone serious about reloading their own ammunition.

Handloader: The Ammunition Reloading Journal Issue No. 274 (October 2011), published by Wolfe Publishing, features detailed historical analyses, including Mike Venturino's look at Sharps Cartridges and Gil Sengel's examination of the 9mm Federal. The issue also includes columns from Dave Scovill, Charles E. Petty, Terry Wieland, and Brian Pearce covering topics such as primer use and high-performance handgunning. Back issues are available through the publisher’s website or secondary markets.

Handloader Issue No. 274 (October 2011) features Brian Pearce’s high-performance handgun loads and Mike Venturino’s exploration of Sharps cartridges. Additional content includes analyses on bullet seating depth, the 9mm Federal, and Ramshot’s Zip propellant, along with reviews of the Lyman Cast Bullet Handbook. Purchase this issue from Wolfe Publishing. Handloader 274 October 2011 - Wolfe Publishing

Handloader Issue 274 (October 2011) features technical articles on high-performance handgun loads by Brian Pearce, modern load development methods, and an overview of Sharps cartridges. The issue also includes expert advice on managing recoil, reviving obsolete rimfire firearms, and reviews of essential reloading tools. Learn more about this issue at Wolfe Publishing Handloader 274 October 2011 - Wolfe Publishing

Handloader Ammunition Reloading Journal October 2011 Issue Number 274 Report

Introduction

The Handloader Ammunition Reloading Journal is a renowned publication that caters to the interests of handloaders, reloaders, and firearms enthusiasts. The October 2011 issue, numbered 274, is a comprehensive edition that features a wide range of articles, reloading data, and product reviews. This report aims to provide a detailed overview of the contents of this issue. One of the cornerstone pieces in Number 274

Articles

The October 2011 issue of Handloader Ammunition Reloading Journal contains the following articles:

Reloading Data

The October 2011 issue of Handloader Ammunition Reloading Journal includes extensive reloading data for various cartridges, including:

Product Reviews

The issue features reviews of the following products:

Other Features

The October 2011 issue of Handloader Ammunition Reloading Journal also includes:

Conclusion

The October 2011 issue of Handloader Ammunition Reloading Journal (Issue Number 274) is a valuable resource for handloaders, reloaders, and firearms enthusiasts. The issue provides in-depth articles, reloading data, and product reviews that cater to a wide range of interests and needs. Whether you are a seasoned handloader or just starting out, this issue is sure to provide useful information and insights to help you improve your reloading skills and stay up-to-date with the latest developments in the field.

The Ghost in the Press (Issue #274)

The October 2011 issue of Handloader arrived in Gerald “Griz” Hickock’s mailbox with a dull thud. At 73, Griz had been reloading since the Johnson administration. He didn’t read the articles for the ballistics charts anymore; he read them for the obituaries.

This issue, Number 274, felt different. The cover story was typical fare: “Heavy .45-70 Loads for Modern Lever Guns” by Bob Milek. But the letter from the editor, a man named Sam who’d taken over after the legendary Dave Wolfe retired, gave Griz pause.

“In this issue,” Sam wrote, “we pay tribute to the forgotten calibers—the .32-20, the .218 Bee, and the .25-20 Single Shot. But more importantly, we are printing a series of load notes found in a reloading shed in Miles City, Montana, belonging to the late Arthur ‘Pinky’ Driscoll. Pinky was a benchrest shooter in the 60s and a hermit thereafter. His notes contain a recipe for the .22-250 that claims ‘three shots in one hole at 400 yards.’ We haven’t verified it. We’ll let you decide.”

Griz dropped his coffee spoon. He knew Pinky Driscoll. In 1968, at the Camp Perry Nationals, Pinky had shot a perfect 100-10x in the varmint match with a wildcat cartridge he refused to name. Men had offered him new pickup trucks for the load data. Pinky just grinned, tapped the side of his nose, and said, “It’s not the powder, boys. It’s the prayer you say while seating the bullet.”

Turning to page 42, Griz found the notes. They were handwritten in faded blue ink, full of cross-outs and odd symbols. The powder wasn’t IMR 4895 or H380. It was a blend: 31.5 grains of old DuPont IMR 4064, but only after it had been “sun-dried on a tin sheet for two August afternoons.” The primer was a Remington 9½, but with the anvil “tapped 1/8-turn counter-clockwise.” The brass had to be once-fired Winchester, and the bullets—82-grain custom swaged soft points “lubricated with melted beeswax and a single drop of bear oil.”

“Nonsense,” Griz muttered. But his hands were already reaching for the old Rockchucker press. Why it endures: The

He followed the instructions to the letter, feeling foolish as he warmed the powder on a baking sheet in the late September sun. The bear oil was impossible, so he used a drop of his own gun oil. He seated each bullet with the press handle pulled so slowly he could feel the individual granules of powder settling.

The next morning, he drove to his private range. He set up a target at 400 yards—a white paper plate with a red dot. He chambered the first round in his pre-’64 Model 70. The bolt felt tighter than usual.

He breathed out. Squeezed.

The rifle didn’t crack. It screamed—a high, silver note he’d never heard before. The recoil was a polite shove. Through the spotting scope, the paper plate looked untouched. Annoyed, he drove the truck downrange.

There was one hole. One ragged, perfectly round hole exactly on the red dot. He walked back, fired the second shot. Again, the silver note. Again, one hole. The third shot melded into the same aperture, the paper barely tearing.

Three shots. One hole. Four hundred yards.

Griz drove home, hands shaking, and wrote a letter to Handloader. “Cancel my subscription,” he scrawled. “I’ve read the last issue I’ll ever need. Issue #274. Tell Pinky’s ghost the prayer works.”

He never reloaded that recipe again. But he kept the issue on his nightstand until the day he died, the pages of the Driscoll article stained with bear oil and something that might have been hope.

In the next issue, the editor ran a small correction: “Several readers reported unusual chronograph results with the Pinky Driscoll .22-250 load. After internal review, we cannot replicate the data. We suspect a misprint in the powder charge. Do not attempt.”

But a few old-timers, like Griz, knew the truth. Some numbers aren’t for replicating. They’re for believing.

Issue Number 274 of Handloader: The Ammunition Reloading Journal (October 2011) provides in-depth technical coverage on historical Sharps cartridges, modern load development, and handgun ammunition, featuring contributions from experts like Mike Venturino and Brian Pearce. The issue serves as a comprehensive resource, offering specialized load data and equipment reviews designed to improve precision and safety for reloaders. For more details, visit Wolfe Publishing. Handloader 274 October 2011 - Wolfe Publishing

Handloader Issue 274 (October 2011) from Wolfe Publishing covers precision reloading, featuring in-depth articles on Sharps cartridges, handgun loads, and 21st-century propellant performance. The issue highlights load data for magnum revolvers, lead-free primer transitions, and historical cartridge analysis to bridge vintage and modern reloading techniques. Detailed information is available from Wolfe Publishing. Handloader 274 October 2011 - Wolfe Publishing

Handloader Ammunition Reloading Journal Issue #274 (October 2011) features in-depth articles by experts on topics such as developing great handgun loads, navigating Sharps cartridges, and modern reloading techniques for accuracy. The issue also includes technical profiles on Ramshot's Zip powder, 9mm Federal, and a review of the Lyman Cast Bullet Handbook. For more details, visit Wolfe Publishing Handloader 274 October 2011 - Wolfe Publishing

Handloader Magazine Issue 274 (October 2011) is a technical treasure trove for reloaders, featuring expert insights from renowned authors like Mike Venturino and Brian Pearce. It is often described by readers as being "like getting a new reloading manual in the mail" because of its deep dives into ballistics and specific load data. Amazon.com Key Articles & Highlights

The issue focuses on precision and history, offering several standout segments: Great Handgun Loads

: Brian Pearce explores the development of high-performance ammunition specifically for handguns. Sharps Cartridges

: Mike Venturino provides a guide to making sense of 15 different options for these classic cartridges. Modern Load Development For specific content from Issue Number 274, I recommend:

: John Barsness explains how bullet seating depth and velocity are the key factors for working up a load in the 21st century. Specialty Topics Managing Recoil

: John Haviland offers tips on "getting in touch with your softer side" through recoil management. Old Rimfires

: Terry Wieland discusses techniques for keeping vintage rimfire firearms functional with appropriate ammo. Lyman Cast Bullet Handbook : A detailed review of the 4th edition by Rocky Raab. Why This Issue Stands Out Unlike general firearms magazines, Handloader

remains the only publication dedicated entirely to the hobby of reloading. Issue 274 is particularly valuable for its "Pet Loads" feature and deep technical dives into smokeless powder burn rates and wildcat cartridges. You can find back issues or digital copies directly through Wolfe Publishing or retailers like from this issue, or do you want help summarizing one of these articles for your post? Handloader 274 October 2011 - Wolfe Publishing

Handloader: The Ammunition Reloading Journal, Issue Number 274 (October 2011), published by Wolfe Publishing Company, focuses on precision handgun loads, propellant profiles, and long-range accuracy techniques. Featured Articles & Columns

Great Handgun Loads: Brian Pearce details methods for developing high-performance handgun ammunition.

Sharps Cartridges: Mike Venturino provides a guide to 15 different options for the Sharps rifle.

Working Up a Load in the 21st Century: John Barsness explores how bullet seating depth and velocity are critical factors for modern accuracy.

Managing Recoil: John Haviland offers insights on reducing the physical impact of heavy loads.

The Short, Unhappy Life of the 9mm Federal: Gil Sengel reviews the history of this cartridge in the "Cartridge Board" column.

Propellant Profiles: R.H. VanDenburg, Jr. examines the characteristics of Ramshot's Zip powder.

Keeping Old Rimfires Burning: Terry Wieland discusses sourcing and using ammunition for vintage rimfire firearms. Technical Guides & New Gear

Magnum Revolver Loads: Brian Pearce shares data for using Alliant Power Pro 300-MP in magnum revolvers.

Neat Tools for the Handloader: Stan Trzoniec highlights new reloading equipment from leading industry companies.

Lyman Cast Bullet Handbook, 4th Edition: A technical review by Rocky Raab regarding this essential manual.

Pistol Pointers: Charles E. Petty investigates "green" (lead-free) primers. Additional Highlights

Mike’s Shootin’ Shack: Mike Venturino discusses his experiences and setup in his personal reloading space.

In Range: Terry Wieland covers "Re-Creating History – with a File," focusing on custom gunsmithing and tool work. Handloader 274 October 2011 - Wolfe Publishing

Beyond the feature articles, Issue #274 contained the beloved monthly fixtures: