Flash Tool 3.04 Win May 2026
(Invoking related search suggestions.)
A: Manually install the VCOM driver via Device Manager → "Add legacy hardware" → "MediaTek DA USB VCOM Port".
No discussion of SP Flash Tool 3.04 is complete without addressing the driver installation ritual. Because MediaTek used a proprietary USB interface, Windows required specific drivers: flash tool 3.04 win
On Windows 10, users had to:
Failure to follow these steps led to the dreaded “BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D8)”—a code that still haunts veteran flashers. (Invoking related search suggestions
Unlike modern versions with descriptive pop-ups, v3.04 used cryptic hexadecimal codes:
| Error Code | Meaning | Solution |
|------------|---------|----------|
| 0x1312 | S_BROM_CMD_JUMP_DA_FAIL | DA version incompatible. Replace MTK_AllInOne_DA.bin in the tool’s folder. |
| 0x1313 | S_BROM_CMD_GET_DEVICE_ID_FAIL | USB connection unstable. Use a different cable or port. |
| 0x1327 | S_DA_SOC_CHECK_FAIL | The scatter file SoC (e.g., MT6580) doesn’t match the device’s actual SoC. |
| 0x1330 | S_BROM_DOWNLOAD_DA_FAIL | Preloader is locked or damaged. Short the test points (force BROM mode). |
| 0x12B2 | S_NOR_FLASH_PROTECTED | Flash is write-protected. Unlock using SP Flash Tool’s “Advanced -> Unlock” (v3.04 had a hidden unlock function requiring a special keyfile). | A: Manually install the VCOM driver via Device
Always use USB 2.0 ports. USB 3.0 often causes STATUS_BROM_CMD_SEND_DA_FAIL on older chipsets with Flash Tool 3.04.