Ericsson Ers 2460 Datasheet Link

Unlike the ERS 2500 or 4500 series designed for climate-controlled wiring closets, the 2460 features fanless operation, a wide operating temperature range, and conformal-coated circuit boards (on specific SKUs).

The Ericsson ERS 2460 remains a solid choice for brownfield industrial networks where ruggedness, low latency, and ring redundancy are critical. Always cross-reference with the latest official datasheet from Ericsson’s support portal using the exact part number (e.g., ROA 158 438/1).

Disclaimer: This content is for informational purposes. Always refer to the official Ericsson documentation for the most current specifications, as product details may change or be discontinued.

Ericsson Radio 2460 (part of the Ericsson Radio System) is a low-band, multi-band remote radio unit (RRU) designed to provide wide-area coverage and excellent signal penetration for LTE (4G) networks. It is particularly effective for rural and suburban deployments where long-range macro-cell performance is critical. The Pulse of the Valley: A Technical Tale

The engineers in the small valley of Oakhaven called it "The Silent Guardian." To everyone else, it was just the Ericsson Radio 2460

, a 37.5 kg block of aluminum alloy bolted to a rail at the top of the ridge.

For years, Oakhaven was a "dead zone." The town sat deep in a geographic bowl where signals from the distant city simply couldn't reach. But when the local carrier decided to modernize, they didn't just want a signal; they wanted a foundation. They chose the Radio 2460 because it spoke the three "low-band languages" the valley needed: Band 8 (900 MHz) Band 20 (800 MHz) Band 28 (700 MHz) On installation day, the technician, Sarah, appreciated the one-bolt installation

system. As she tightened the final 5 mm bolt and connected the SFP modules , she knew that even if the temperature dropped to in the winter or hit in a summer heatwave, the 2460’s passive cooling

would keep it humming without a single mechanical fan to fail. Once powered up at its standard

, the radio began its work. Its 2Tx/4Rx architecture pushed data across the valley floor, penetrating thick brick walls and reaching basement workshops that hadn't seen a "bar" of signal in a decade. It wasn't just about faster downloads; it was the spectrum efficiency. By combining three bands into one hardware footprint, the carrier saved on site rental and energy, using roughly to light up an entire township.

Now, as the sun sets over Oakhaven, the Radio 2460 sits silently on its pole, resisting wind loads of up to

. It doesn't look like much, but for the people below, it is the invisible thread connecting them to the rest of the world. Key Specifications from the Datasheet Radio Type : Outdoor macro remote radio unit. Frequency Support : Triple-band (B8, B20, B28B). Dimensions : 37.5 kg. Power Consumption : Typical 1215 W. Environment : Operating range from futuristic story involving its 5G-ready capabilities, or perhaps a technical breakdown of its mounting options? KRC161831/1 – Radio 2460 24B8 / 24B20 / 24B28B M01

The Ericsson Radio 2460 (also identified as ERS 2460) is a high-performance, multi-band remote radio unit (RRU) designed for the Ericsson Radio System portfolio. Engineered for macro-cell coverage, it allows telecommunications operators to consolidate multiple low-frequency bands into a single unit, significantly reducing the site's physical footprint and complexity. Key Technical Specifications

According to detailed technical handouts, the Radio 2460 is built for heavy-duty outdoor deployment with the following core specs: Specification RF Configuration 2Tx / 4Rx (Transmit/Receive) Supported Bands Band 8 (900 MHz), Band 20 (800 MHz), and Band 28B (700 MHz) Dimensions (H x W x D) 553 mm x 398 mm x 190 mm (without fan) Weight Approximately 37.5 kg Operating Temperature -40°C to +55°C Power Consumption 1215 W (Typical) Input Voltage -38.0 to -58.5 VDC Connectors

4.3-10 RF connectors, External Alarm DIN, and SFP for fronthaul Hardware and Design Features ericsson ers 2460 datasheet

Triple-Band Consolidation: By supporting Bands 8, 20, and 28B in one unit, the 2460 simplifies LTE and 5G deployment strategies, particularly for rural and suburban coverage where low-band penetration is critical.

Thermal Management: The unit is encased in a durable aluminum alloy housing. While primarily passively cooled, an optional fan unit can be installed for environments requiring additional heat dissipation.

Flexible Installation: The radio supports multiple mounting alternatives, including pole, wall, and rail mounting using standard ERS brackets.

Fronthaul Connectivity: It utilizes eCPRI (packet fronthaul) technology, ensuring it is ready for Cloud RAN and Open RAN architectures. Installation and Maintenance

The Installation Guide for Radio 2460 outlines several critical procedures for field technicians:

Install Radio 2460 | PDF | Electrical Connector | Screw - Scribd

If you have a physical unit, please verify the full label (e.g., ROA 123 4567). For an accurate datasheet, contact Ericsson Enterprise or a component distributor.

There is no single "ERS 2460" part number; the unit is configured to order. Common variant codes associated with the RBS 6601 platform include:

Disclaimer: This document is an assembly of technical data for the Ericsson RBS 6601 platform. For precise installation, safety, and maintenance guidelines, always refer to the official Ericsson Product Documentation (RBS User Manual).

The Ericsson Radio 2460 (KRC161831/1) is a versatile low-band, multi-band remote radio unit (RRU) part of the Ericsson Radio System (ERS) portfolio. Engineered specifically for wide-area coverage and network modernization, it allows operators to consolidate multiple frequency bands into a single compact hardware platform. Key Technical Specifications

The Radio 2460 is designed for high performance in macro-cell deployments with the following core technical attributes:

Frequency Bands: Supports LTE deployments in Bands 8 (900 MHz), 20 (800 MHz), and 28 (700 MHz).

Operating Modes: Capable of supporting GSM, WCDMA, LTE, and 5G mode using FDD and TDD.

Physical Dimensions: Typically measures approximately 553 x 398 x 190 mm with a weight of roughly 37.5 kg (varying slightly by sub-model). Unlike the ERS 2500 or 4500 series designed

Output Power: Supports a total output power of 320W, typically configured for 2x2T/4R operations.

Connectivity: Equipped with 4x4.3-10 RF connectors and 2x10G FullAXS SFP/fiber optic ports for high-speed fronthaul. Advanced Features & Technology

The Radio 2460 integrates several of Ericsson's modern RAN (Radio Access Network) technologies to optimize efficiency:

Ericsson Spectrum Sharing (ESS): Designed to support 5G NR and spectrum sharing, allowing for a smooth transition from 4G to 5G without needing dedicated spectrum.

Energy Efficiency: Features passive cooling (no internal fans) to reduce maintenance and lower the site's energy footprint.

Fronthaul Capabilities: Supports eCPRI (Packet Fronthaul), which is essential for modern, high-capacity packet-based transport networks.

Open RAN Ready: Built with an architecture that is prepared for Open RAN environments. Installation & Deployment

The ERS 2460 is highly flexible regarding where and how it can be deployed on a site:

Mounting Options: Can be installed on poles, walls, or rails using standard ERS brackets. It can also be mounted directly behind or below an antenna to minimize cable loss.

Ease of Installation: Utilizes Ericsson's unique one-bolt installation rail system, which significantly speeds up site deployment and reduces technician labor.

Harsh Environments: Engineered to operate in extreme temperature ranges from -40°C to +55°C and is built to withstand high wind loads of up to 320 N at 50 m/s. Typical Use Cases

Operators deploy the Radio 2460 primarily in scenarios requiring extensive coverage and reduced site complexity:

Rural & Suburban Coverage: Ideal for nationwide coverage layers due to its use of low-frequency bands that penetrate buildings and travel long distances.

Network Modernization: Used to replace multiple legacy single-band radios with one multi-band unit, reducing the total hardware footprint and rental costs on towers. Disclaimer: This content is for informational purposes

Macro-Cell Capacity: Provides robust 4T4R performance for macro sites while maintaining energy efficiency. KRC161831/1 – Radio 2460 24B8 / 24B20 / 24B28B M01

The Ericsson Radio 2460 is a multiband radio unit typically used in Ericsson Radio System (ERS) deployments for high-capacity mobile networks. While a single consolidated "datasheet" PDF is often proprietary, technical details and installation specifications are available through various site deployment and installation guides. Key Technical Specifications

Radio Type: Multiband Outdoor Radio (frequently deployed alongside Radio 4480).

Capacity: High-capacity RAN compute unit prepared for NR (5G), LTE, and LTE Evolution. Mounting Options: Rail mounting on walls or poles. Dual ERS bracket on poles. Antenna-integrated or separate installation alternatives. Power & Connectivity: Power Supply: Standard -48V DC.

Interfaces: Equipped with SFP slots (up to 25Gbps), CPRI ports for fronthaul, and external alarm ports. Documentation Links

Installation Guide: Detailed instructions for tools, safety, and physical setup can be found in the Install Radio 2460 Manual.

Deployment Handout: For site managers planning multiband deployments, the ERS Handout for Radios 2460 & 4480 provides operational context.

Install Radio 2460 | PDF | Electrical Connector | Screw - Scribd

If you’d like, I can fetch the official ERS 2460 datasheet and extract exact numbers (PoE wattage, switching capacity, forwarding rate, supported protocols). Proceed to fetch?

The ERS 2460 family includes several fixed-configuration models. Key variants are:

| Model | 10/100/1000 BASE-T Ports | SFP (Gigabit) Uplink Ports | PoE+ Support | Default AC Power | | :--- | :--- | :--- | :--- | :--- | | ERS 2460-24T | 24 | 2 | No | Internal | | ERS 2460-24P | 24 | 2 | Yes (802.3at/af) | Internal (450W) | | ERS 2460-48T | 48 | 2 | No | Internal | | ERS 2460-48P | 48 | 2 | Yes (802.3at/af) | Internal (750W) |

Form Factor: